Hot Search: atomrobot 机器人 D3P D3PM D4 D5 S6
go back
Daily Chemical Industry

Wet wipes lid applicator

After the wet wipes are packaged, manual or mechanical gluing is needed before gluing and then gluing the cover. The gluing accuracy is poor and the speed is slow. After replacing with parallel spider hand, the gluing accuracy is greatly improved, and the accuracy is stable within ± 1 mm. The consistency of gluing and capping is guaranteed. The gluing efficiency can reach 65-90 pieces / min, which can replace 2-3 workers, more than 2 times of the traditional mechanism. Compatible with a variety of cover type, realize the flexible switching of multi cover type.

Economic benefits

  • Production capacity

    65Pieces/min
  • Manpower

    2
  • Productivity improvement rate

    50%
  • Payback period

    12Months

Production-line process

  • 01

    The packaged whole package of wipes is transported to the vision system through the conveyor line for visual recognition and positioning.

  • 02

    Manually place the unlabeled wipes in the storage tank as required. The automatic feeding device will automatically push 2 covers to the cover conveying line each time.

  • 03

    Manually clamp the whole plate of label in the label wheel, and put the beginning position of the label paper according to the actual path for standby.

  • 04

    The cover is transported to the labeling position, and the detection sensor starts the labeling operation according to the actual position of the cover.

  • 05

    When the labeled cover is transported to the end station of the cover conveying line, the in place sensor will send a signal to the robot for grasping. The robot grabs the cover and cooperates with the gluing machine according to the set path for gluing, and finally completes the gluing operation.